China Track Wheel U-Shaped V-Shaped Y-Shaped Heavy Pulley 2 “3” 4 alternator pulley

Product Description

One Bearing Trapezoid Gate Wheel

Design A B C D E Bodyweight
(Y)
Models:g
Weight
(U)
Models:g
Weight
(V)
Units:g
30×11 35 eleven 30 forty five 17 * * 63
40×14 45 fourteen 38 75 twenty five 192 185 194
50×15 55 15 48 75 25 253 244 263
50×15 sixty fifteen forty eight eighty five thirty 303 292 302
60×17 sixty five 20 58 eighty five 30 400 395 410
70×20 80 twenty sixty eight one hundred 35 640 640 665
80×20 85 20 48 100 35 805 785 825
90×20 one hundred 20 88 133 35 1130 1121 1145
100×20 a hundred and five 20 98 133 35 1350 1338 1363
The knowledge is calculated by hand, perhaps there are some mistakes, just for reference.

Double Bearing Gate Wheel

Design A B C D E Excess weight(Y) Weight(U)
50MM 55 26 forty eight 85 thirty 324 320
60MM sixty five thirty 58 eighty five thirty 617 580
70MM eighty 32 68 one hundred 35 977 954
80MM 85 32 forty eight 100 35 1260 1223
90MM a hundred 32 88 133 35 1788 1760
100MM a hundred and five 32 98 133 35 2100 2078
The knowledge is calculated by hand, perhaps there are some errors, just for reference.

Laminated Gate Wheel

Product A B C D Bodyweight(Y/V) Bodyweight(U)
50mm 48 15 one hundred 26 260 250
60mm fifty eight 17 100 26 390 360
70mm sixty eight twenty 136 33 590 570
80mm 78 20 136 33 750 725
90mm 88 twenty 152 33 1060 1030
100mm ninety eight twenty 152 33 1265 1225
The knowledge is calculated by hand, maybe there are some problems, just for reference.

Cling Gate Wheel

 Model A B C D E F G H I
H25 fifty one 25 M9*50 9 ninety five seventy nine twenty five six 27
H38 86 38 M12*70 eleven one hundred twenty 118 38 ten 32
H55 one hundred fifteen fifty five M20*85 14 140 159 44 ten 15
The info is calculated by hand, maybe there are some mistakes, just for reference.

Triangle Gate Wheels/ Rotation Gate Wheels/ Hanging Wheels/ White Zinc Gate Wheels/ Doule Wheels Double Bearing Gate Wheel

      We have presently had nealy a ten years producting and exporting expertise. Given that 2014, we have sold our products to dozens of nations around the world all around the globe. And we have established a deep cooperative romantic relationship with many clients. 
      We make our goods with heart, try to carry the very best high quality for customers. So we received a great deal of consumer acceptance. After that, we will also strictly handle, down-to-earth, and forge in advance.

        1.ZheJiang Joinwin Hardware and Instruments Co., Ltd. we have 10 several years production and exporting experience which ranks amid the best in China. Mainly sales pliers, spanners, scissors, saws, screwdrivers, wheels, sillicone sealant, tapline and other hand instruments. 
        2.Situated in HangZhou the place is just 180km far from HangZhou Port and a lot of uncooked content factories around, tremendously minimizes transportation and procurement costs.
        3.We have specialist revenue and engineers to provide content provider to clients. Our organization handles an region of 1000 sq. meters, has the most advanced production products and technological innovation.      
        4.Customer 1st, crew work, embrace adjust, sincere are our business tradition.      
        5.We intention to supply clientele more security and handy lifestyle.

              Pliers                 Adjustable Wrench  Combination Spanners         Hammers               Pruner Scissors        Aviation Tin Snips
      Screwdrivers                    Padlocks                   Hand Saws                       Axe                 Silicone Sealant 
Q1: Can I get a sample?
A1: Yes, the samples are usually cost-free for consumers.

Q2: Can you give OEM provider?
A2: Of course, we can produce the items according to clients’ needs.

Q3: How can you ensure the quality?
A3: We have sophisticated products and expert engineer and high quality inspector to guarantee the good quality of the products. And we will send out added items for insurance policies. Besides, we have satisfied right after-support.

This autumn: What is the MOQ?
A4: 500 PCS.

Q5: How extended you will end my get?
A5: Absolutely in thirty days. (The distinct predicament relies upon on the generation timetable of the creation division.)


/ Piece
|
500 Pieces

(Min. Order)

###

After-sales Service: Online Technical Guidance
Warranty: 1 Year
Certification: CE
Splittable: Splittable
Surface Treatment: Zinc Plated
Material: Metal

###

Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model A B C D E Weight
(Y)
Units:g
Weight
(U)
Units:g
Weight
(V)
Units:g
30×11 35 11 30 45 17 * * 63
40×14 45 14 38 75 25 192 185 194
50×15 55 15 48 75 25 253 244 263
50×15 60 15 48 85 30 303 292 302
60×17 65 20 58 85 30 400 395 410
70×20 80 20 68 100 35 640 640 665
80×20 85 20 48 100 35 805 785 825
90×20 100 20 88 133 35 1130 1121 1145
100×20 105 20 98 133 35 1350 1338 1363
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D E Weight(Y) Weight(U)
50MM 55 26 48 85 30 324 320
60MM 65 30 58 85 30 617 580
70MM 80 32 68 100 35 977 954
80MM 85 32 48 100 35 1260 1223
90MM 100 32 88 133 35 1788 1760
100MM 105 32 98 133 35 2100 2078
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D Weight(Y/V) Weight(U)
50mm 48 15 100 26 260 250
60mm 58 17 100 26 390 360
70mm 68 20 136 33 590 570
80mm 78 20 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm 98 20 152 33 1265 1225
The data is measured by hand, maybe there are some errors, just for reference.

###

 Model A B C D E F G H I
H25 51 25 M9*50 9 95 79 25 6 27
H38 86 38 M12*70 11 120 118 38 10 32
H55 115 55 M20*85 14 140 159 44 10 15
The data is measured by hand, maybe there are some errors, just for reference.

/ Piece
|
500 Pieces

(Min. Order)

###

After-sales Service: Online Technical Guidance
Warranty: 1 Year
Certification: CE
Splittable: Splittable
Surface Treatment: Zinc Plated
Material: Metal

###

Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model A B C D E Weight
(Y)
Units:g
Weight
(U)
Units:g
Weight
(V)
Units:g
30×11 35 11 30 45 17 * * 63
40×14 45 14 38 75 25 192 185 194
50×15 55 15 48 75 25 253 244 263
50×15 60 15 48 85 30 303 292 302
60×17 65 20 58 85 30 400 395 410
70×20 80 20 68 100 35 640 640 665
80×20 85 20 48 100 35 805 785 825
90×20 100 20 88 133 35 1130 1121 1145
100×20 105 20 98 133 35 1350 1338 1363
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D E Weight(Y) Weight(U)
50MM 55 26 48 85 30 324 320
60MM 65 30 58 85 30 617 580
70MM 80 32 68 100 35 977 954
80MM 85 32 48 100 35 1260 1223
90MM 100 32 88 133 35 1788 1760
100MM 105 32 98 133 35 2100 2078
The data is measured by hand, maybe there are some errors, just for reference.

###

Model A B C D Weight(Y/V) Weight(U)
50mm 48 15 100 26 260 250
60mm 58 17 100 26 390 360
70mm 68 20 136 33 590 570
80mm 78 20 136 33 750 725
90mm 88 20 152 33 1060 1030
100mm 98 20 152 33 1265 1225
The data is measured by hand, maybe there are some errors, just for reference.

###

 Model A B C D E F G H I
H25 51 25 M9*50 9 95 79 25 6 27
H38 86 38 M12*70 11 120 118 38 10 32
H55 115 55 M20*85 14 140 159 44 10 15
The data is measured by hand, maybe there are some errors, just for reference.

What Is a Pulley?

The pulley is a wheel mounted on a shaft or axle. Its purpose is to support the movement of a cable that is taut. This cable transfers power to a shaft. However, there are certain safety precautions that you should follow when using a pulley. Read on to learn more! Listed below are common uses and their main parts. Listed below are some of the benefits of using a pulley.
pulley

Common uses of a pulley

A pulley is a common mechanical device used to increase the force needed to lift a heavy object. Most commonly, these devices are used in construction equipment. These machines use high-tension ropes to transfer heavy objects from one floor to another. Other common uses of a pulley include buckets and flagpoles. These devices are extremely useful in a wide range of applications. To learn more about the common uses of pulleys, keep reading.
A pulley is a wheel with grooves for holding rope. Its purpose is to change the direction and point at which a pulling force acts. It is usually used in sets to reduce the amount of force needed to lift a load, but the work involved is similar. Pulleys are also used in rock climbing devices. For many applications, a pulley is a vital part of construction.
The most common use of a pulley involves hoisting and lowering a flag. Other examples include clotheslines, bird feeders, and escalators. Pulleys are also commonly used on oil derricks. Many other common applications include hoisting and lowering garage doors. Pulley systems are also used in engines and cranes. For more information, check out our interactive pulley diagram!
Pulleys can also be used to lower total work required for a task. In many cases, a pulley will consist of two parts: the pulley hub and the shaft pulley. The hub clamps the shaft pulley, while the pulley itself is connected to the motor or other device. If you’re looking for a pulley, it’s important to learn how it works.
The most common uses for a pulley involve lifting heavy objects, and the mechanism used to lift them is known as a pulley. A pulley is an industrial device that uses two wheels to reduce the force needed to lift a weight. The pulley reduces this force by half by allowing the user to pull on the rope four times as far. The pulley also allows for a smaller lifting distance.

Main parts of a pulley

A pulley consists of the main element of a system. This is typically a cable, rope, belt, or chain. There are two basic types of pulleys – a Driver Pulley and a Follower Pulley. Pulleys are available in small and large sizes. The periphery part of the pulley is called the Face, and the protruding middle part is called the Crown. A pulley’s face can be round, rectangular, or even “V” shaped.
The first pulley was created by the Greek mathematician Archimedes in the third century BCE. These simple machines are made of a rope, an axle, and a wheel. The pulley’s end is attached to a person, object, or motor. These machines can be used in various tasks to lift heavy objects. The pulley is a great mechanical advantage for any lifter.
The ideal mechanical advantage of a pulley is defined by the number of rope segments that pull an object. The higher the number of loops on the rope, the higher the mechanical advantage. The greater the mechanical advantage, the less force is required to move the object. Likewise, the greater the distance the rope traverses, the higher the mechanical advantage of a pulley. There are several different types of pulley, depending on their combination of rope, wheel, and rope.
The basic components of a pulley are the face and hub, and the rope is threaded into the center of the pulley. The pulley is usually made of a rope and can be used to lift heavy weights. It can also be used to apply great force in any direction. Step pulleys have multiple faces, which are fixed in sequence. They can also increase the speed of the driven pulley.
A pulley is a simple machine consisting of a wheel, rope, or chain. These parts are crucial for making moving and lifting easier. Because they change the direction and magnitude of force, they can be a useful tool. Some pulleys even change direction. You can learn more about the pulley by downloading this resource today. The resources are designed to support the new 9-1 GCSEs in Design & Technology and Engineering.
pulley

Mechanical advantage

Pulleys have been used to move heavy objects for centuries. When two rope sections are used, the weight of a 100kg mass can be moved with only 500 newtons of force. Adding an extra pulley increases the mechanical advantage. If the pulley has two wheels, the distance between the rope sections and the wheel grooves is only half the distance, but the mechanical advantage still applies. Adding another pulley increases the mechanical advantage, but can be risky.
Mechanical advantage is the ratio of force used versus force applied. The calculations are made under the assumption that the ropes and weights do not elongate or lose energy due to friction. If the weights are very light, the mechanical advantage is greater than that in the real world. To calculate the mechanical advantage, the weight of the load to be lifted must be the same as the weight of the person using the pulley.
A single moveable pulley has a mechanical advantage of two. The weight passes around the pulley, and one end of the rope is attached to a fixed point. The pulling force is then applied to the other end of the rope. The distance the weight travels doubles, or halved, depending on the direction of the pulley. Adding a second pulley reduces the distance and the effort required to lift it.
There are several ways to calculate the mechanical advantage of a pulley system. Some methods are specific to certain types of systems, while others work for all systems. The T-Method is a good choice in many applications, as it calculates the units of tension for each rope segment. Once you have determined the input force, you need to determine the maximum force that will be applied to each component. A compound pulley, for example, will require 4 units of tension for each rope segment.
In simple terms, the effort is the amount of force needed to lift the load. This force is measured in newtons (N). A mechanical advantage is often presented without units. If the student does not have this unit, you may need to convert the units to newtons, since one kilogram is equal to 10 newtons. If you can’t figure out the units of effort, you can use the KWL chart provided by the teacher.
pulley

Safety precautions

There are a few safety precautions you should take when using a pulley. First, always check the SWL (safe working load) before attaching anything to the pulley. This indicates the maximum weight and angle the pulley can safely handle. Second, make sure that your work area is free from people and debris. Third, wear a hard hat to protect your head from blows and falling objects.
Another important consideration is anchoring. Although the pulley reduces the weight of an object, it is not enough to eliminate the weight. This is especially true if you are hoisting a heavy object, such as a motorcycle or lawnmower. It is important to ensure that the anchoring point can support the entire weight of the load. It is also important to follow proper anchoring procedures when using a pulley to lift a motorcycle or lawnmower.
In addition to the safety latch, you should use a tag line to control the suspended load. Remember that a chain pulley block is necessary for vertical lifting. You should also wear personal protective equipment (PPE) while using a pulley to avoid injuries. If your workplace does not have an PPE policy, you should consider implementing a similar policy. These safety guidelines are a good start.
If you are using a pulley to lift heavy objects, make sure to wear gloves. Those who are not familiar with rope-pulling will have an easier time demonstrating how it works. If you are using a rope-pulley system in a classroom, be sure to follow lab safety guidelines. Wear cloth gloves, clear the area, and do not jerk the rope. In addition, never allow yourself to be pulled into the rope by an unfamiliar person.
Another important safety precaution when using a pulley is to ensure that the anchor point for your system is adequate to support the weight of the object being lifted. Check with the manufacturer of the pulley to find out what its weight limit is, as some types of pulleys are designed to lift much heavier weights than others. It is important to follow all manufacturer’s instructions when using a pulley.


editor by CX 2023-03-31