China Intelligent Trauma Negative Pressure Comprehensive Therapy Apparatus Using New Long-Life Vacuum Pump pulley system

Item Description

Item Description

Positive aspects of transportable trauma unfavorable stress treatment instrument:

1. Small measurement can be carried with you

two. Integrated design and style of drainage bottle

three. Tilt alarm and backflow avoidance style

4. Intermittent lower unfavorable strain

five. 7 modes are easy to run

The next era of smart trauma and unfavorable stress comprehensive treatment method instrument-Chuangkang Bio

Functions: Intermittent lower adverse strain, less complicated operation

Operate attributes: the development of pure damaging strain drainage to boost the blood perfusion of the wound tissue, boost the oxygen partial strain of the wound tissue, enhance the metabolic process and proliferation of the tissue, and boost the repair potential of significant wounds as the main function.

At existing, hospitals normally use central unfavorable force as the suction supply. The central negative strain has the subsequent troubles:

01. Sustained damaging force suction will result in numbness of blood vessels, which will end blood provide and nutrient delivery. Such adverse stress therapy can result in inadequate regional blood perfusion in the location of the wound and adjacent tissues, which is not conducive to fast therapeutic of the wound.

02. The central negative force is fundamentally higher than -one
[Registration Certificate No.] Xihu (West Lake) Dis.e Be aware
[Product overall performance construction]
The ZN-50 Intelligent Trauma and Negative Pressure Complete Treatment Instrument is moveable and is composed of a host, a negative stress bottle, and an adapter.
The normal doing work damaging pressure benefit of ZN-50 intelligent trauma damaging stress extensive therapy instrument is 80-120mmHg, digital show, adopts a new long-daily life vacuum pump, can function repeatedly for a long time, the sounds is much less than 55dB, no pollution, the air stream is 6~ 25L/min, high functioning effectiveness. Method adjustment is basic and dynamic management. It has the functions of damaging force beneath strain alarm, damaging pressure above strain alarm, low voltage alarm, pipeline and wound blockage alarm, pipeline and wound area air leakage alarm and other features.
[Physical appearance composition] Specialized quotas

[Scope of software]
Employed in conjunction with disposable negative force drainage wound treatment components, it is suitable for the following treatment method ranges:
1. Acute wounds.
two. Long-term wounds and tough-to-recover wounds.
3. Wounds with much more fluid leakage right after medical procedures and need to have to be drained.
one. Undebrided wounds with necrotic eschars.
two. There is tumor tissue on the margin of the wound.
three. Sinus passages that talk with organs.
four. Wounds with uncovered massive blood vessels or organs.
[Safety measures, warnings and reminders]
one. This machine need to be operated and employed by specialist health-related workers strictly in accordance with the guidelines after appropriate education. You should use it inside of the scope of this machine. 2. The human body of the equipment must be stored dry. Do not clean in h2o. The electricity plug, change and power jack are moist or splashed
   Not to be used under.
3. This equipment uses a highly delicate damaging strain sensor to measure strain, and is calibrated with absolute air stress. As a result, when the machine is employed, the surroundings
  Changes in temperature, air force, and humidity will impact the change in adverse stress just before starting up. Established the functioning negative force in plateau places.
  Please incorporate the adverse force price ahead of beginning up.
4. Ahead of starting up the machine, check out whether or not the adverse stress bottle, every interface, and the pipe relationship of the joint are firmly related, and must not be unfastened or leaking.
5. For the duration of the therapy approach, when the liquid reaches the warning line of the unfavorable pressure tank, the equipment need to be shut down in time, the energy provide need to be turned off, and the drainage liquid should be discarded or replaced.
6. Check out and change the fuse tube when the device is powered off.
7. Following the machine is used, the energy swap need to be turned off.
eight. For other safeguards, remember to refer to the recommendations on the back again of the instrument.
[Label and Packaging Marking Sample Photograph]

 Fragile, deal with with care, keep dry, stacking layer limit up

Product functionality structure: ZN100 series intelligent trauma negative stress comprehensive treatment instrument is a desktop, mostly composed of a host, a adverse strain bottle holder, and a energy wire. There are distinct specs in accordance to the dimension of the functioning stress, air circulation, show, operation keyboard, and the dimensions of the instrument.

The doing work negative stress value of ZN sequence smart trauma damaging strain comprehensive therapy instrument is ~-200mmHg, digital screen, adopts a new long-lifestyle vacuum pump, can function constantly for a extended time, the sound is not more than 55dB, no pollution, the air stream is 6~25L/ min, large perform efficiency. The adverse strain value can be arbitrarily established and dynamically controlled. The working time, intermittent time, and total working time can be arbitrarily established in accordance to medical requirements. It has the features of unfavorable stress under strain alarm, negative force in excess of stress alarm, reduced voltage alarm, pipeline and wound blockage alarm, pipeline and wound surface area air leakage alarm and other features.

Employed in conjunction with unfavorable force drainage kits, it is suited for the subsequent therapy ranges: 1. Acute wounds. 2. Persistent wounds and challenging-to-recover wounds. 3. Wounds with far more fluid leakage following surgical treatment and want to be drained.


Installation Notes

one. Just before use, the instrument should be positioned in a stable area, and the hook can be utilized to hang it on the medical center mattress if needed.
2. Meticulously push the adverse stress bottle into the corresponding place and verify its tightness. (Pay attention to the needle detector in the interface, do not
   The probe is bent due to the deviation of the push-in place).
3. Link the port on the unfavorable force bottle with the corresponding pipeline of the disposable unfavorable strain drainage wound safety substance with the matching connecting pipe.
four. Turn on the electrical power, the power switch turns to AC, the indicator AC is on (turns to DC when the power is off or other unique conditions, indicating
   (Gentle AC off), go through the self-check out of the instrument and verify regardless of whether it is turned on generally.
five. Guidelines for indicator light-weight:
five.1 ON: Lights up when the motor is functioning, and flickers when placing the doing work time of the motor.
five.2 OFF: The motor stops and lights up, and it flashes when the motor quit time is established.
5.3 AC: Use AC electrical power offer to mild up, and DC electricity offer to light-weight up.
5.4 WARING: flashes when different alarms happen.
[Operation method]
one. Set the parameters in the end operating point out
one.1 Push the “Settings” button to enter the assortment menu.
1.2 At this time, the middle line of the display demonstrates 2 digits. Turn the “Transfer Marker/Modify” important to select the corresponding mode (towards
     Rotation to the remaining is decrement, and rotation to the right is to boost):

Method Functioning time Intermittent time Instrument unfavorable pressure
01 5min 2min eighty
02 5min 2min 100
03 5min 2min a hundred and twenty
04 Steady with no interruption eighty
05 Continuous without intermittent 100
06 Constant with no intermittent one hundred twenty
07 Utilized for manufacturing unit debugging and upkeep

one.3 Soon after the assortment is finished, push the “Established” button to affirm the choice, and press the “Start off/Cease” button to commence the instrument.
A. If the unfavorable stress lasts for a lot more than ten minutes, the tissues are easily tolerated, fatigued, and insensitive to unfavorable pressure, and the blood movement of the wound will gradually lower, so the working time of the adverse stress pump is not straightforward to be way too lengthy. Nonetheless, the intermittent time exceeds 3-4 minutes, and the blood stream of the wound also drops speedily, so the intermittent time is not simple to exceed 3 minutes.
B. The difference amongst the unfavorable force benefit of the wound surface and the damaging strain price of the instrument (damaging strain supply) comes from the resistance in the dressing. When the pus, secretions, and necrotic tissue in the dressing improve, the resistance will progressively boost and the big difference will enhance. The farther the take a look at stage is from the suction stage of the adverse strain source, the greater the effect. When the distinction is way too big, the wound at a distance will have inadequate curative result. Therefore, the variation is greater than the set price. The instrument will instantly take away the blockage initial. When the blockage cannot be taken out regularly, the instrument will give an alarm. At this time, the wound need to be flushed immediately. When the blockage can not be solved effectively, the dressing ought to be changed.
D. Sealing and washing of the wound: normal washing when the wound is dry washing when the resistance in the sponge is too big normal washing on the wound with unique an infection. Modify the pressure (peak) and suction of the injected liquid as required, and the home time of the liquid on the wound floor. When the suction power is managed at thirty-50mmHg, it is most beneficial to the materials excretion in the sponge. If the suction energy is also large, the compression resistance of the sponge will boost, which is not conducive to the material excretion.
[Routine maintenance method]
1. The equipment need to be stored stage throughout transferring and putting.
2. The device entire body need to be retained dry. Do not clean in drinking water. Do not use the power plug, switch and power jack when damp or splashed.
3. When the equipment is left for a long time, the battery requirements to be billed each and every 6 months. Technique: Plug in the AC electrical power provide and change the electricity change to AC, cost for 8 hours.
four. When the battery is utilized for electrical power source, the battery lower voltage alarm indicator flashes, make sure you cost it in time. After the battery is completely billed, if the functioning time is considerably less than half an hour, or the battery has been used for more than 2 years, make sure you exchange the battery.
5. If leakage, overheating, irregular pressure exhibit and other abnormal phenomena happen throughout the operating procedure, remember to end using it quickly and make contact with our following-income services in time or inquire experienced staff for maintenance.
6. During the warranty period, remember to do not disassemble and inspect it by your self. If the device is damaged due to this or other violations of laws, our firm will not be dependable for the warranty.
[Storage conditions and strategies]
Location it horizontally. It is strictly forbidden to set it upside down or on its side. Maintain the environment nicely ventilated, cost-free of large temperature, large strain and corrosive fuel, and keep away from vibration and collision.
Straightforward fault analysis and troubleshooting
Fault inspection and therapy
The indicator light is not on. Regardless of whether the energy wire is linked correctly,
Whether the voltage is regular,
No matter whether the fuse tube is burnt out and the relationship is regular
Control the voltage
Trade the fuse tube
The pump does not perform. Verify no matter whether the circuit and pump are normal.
The negative force value is not arrived at. Is the bottle cap tightly closed?
Whether or not the pipeline relationship is leaking.
Whether or not the adhesive film is leaking. Tighten the cap of the reservoir bottle tightly.
Enhance the pipeline connection firmly.
Subsidy glue sticking movie.
For other faults, make sure you make contact with our company and dealers. Or question a qualified professional to mend it to guarantee the security of the item following restore.
[]Validity interval]
The battery existence is generally 2 several years, a lot more than 2 a long time or the operating time is considerably less than fifty percent an hour following the battery is completely charged. The battery needs to be changed. The existence of the complete equipment is primarily identified by the vacuum pump and doing work problems, this kind of as the steady doing work time of the vacuum pump for far more than 6000 hours or adverse pressure in a closed state If the value does not reach the normal value, the vacuum pump requirements to be replaced.
[Other content material]
This solution has a one-calendar year totally free guarantee and lifetime maintenance.

Warranty Commitment

    The organization promises to offer guarantee services in 1 calendar year from the date of purchasing the gear made by the business. If the solution by itself has top quality problems, the firm has the correct to pick to mend or change the product with out incorporating any expense to the consumer.
The company will not be jointly and severally liable for merchandise hurt caused by abuse, incident, inappropriate operation or violation of guidelines for use. The buyer should return the guarantee registration card to the company in 30 days following the solution is ruined, normally it will be considered invalid. Details such as invoices and solution serial quantities have to be stuffed in. The guarantee card is minimal to the unique purchaser and cannot be transferred.


one.What is advantage on high quality?

The business is furnished with designed gear and technological innovation from Germany, Belgium, and ZheJiang (region). 

two. What is MOQ?
thirty,00 pcs, It depends on requirements of goods.

3. How to area a purchase?
Spot purchase with salesperson
Make payment for deposit
Sample generating for affirmation prior to mass manufacturing
Soon after sample verified, mass creation start
Merchandise are completed,notify buyer to make payment for harmony
Generation time : thirty-40 times.

four. What is your phrase of payment?
T/T is a typical payment (30% in advance, 70% ahead of delivery).
Paypal and Western Union are just for a sample

US $160-3,600
/ Piece
5 Pieces

(Min. Order)


Type: Traumatology
Function: Biological Regulatio
Theory: Negative Pressure
Certification: CE, FDA
LCD Display: Without LCD Display
Group: Adult


US $160-3,600
/ Piece
5 Pieces

(Min. Order)


Type: Traumatology
Function: Biological Regulatio
Theory: Negative Pressure
Certification: CE, FDA
LCD Display: Without LCD Display
Group: Adult



Mechanical advantages of pulleys

A pulley is a mechanical device used to transmit motion. The device has a variety of uses, including lifting heavy objects. In this article, we will discuss the mechanical advantages, types, common uses and safety considerations of pulleys. We’ll also discuss how to identify pulleys and their components, and what to look out for when using pulleys. Read on to learn more about pulleys.

Mechanical advantages of pulleys

The mechanical advantage of pulleys is that they change the direction of force from one direction to another. In this way, the person lifting the heavy object can change its position with minimal effort. The pulleys are also easy to install and require no lubrication after installation. They are also relatively cheap. Combinations of pulleys and cables can be used to change the direction of the load.
The mechanical advantage of a pulley system increases with the number of ropes used in the system. The more cycles a system has, the more efficient it is. If the system had only one rope, the force required to pull the weight would be equal. By adding a second rope, the effort required to pull the weight is reduced. This increase in efficiency is known as the mechanical advantage of the pulley.
Pulleys have many uses. For example, ziplines are one application. This is a good example of pulleys in use today. Pulley systems can be complex and require a lot of space. Using ziplines as an example, advanced students can calculate the mechanical advantage of multiple pulleys by dividing the work done by each pulley by the remainder or fraction. Regents at the University of Colorado created a zipline with K-12 input.
Another use for pulleys is weight lifting. This technique is very effective when using multiple strands of rope. A single rope going from one pulley to the other with just two hands is not enough to lift heavy objects. Using a pulley system will greatly increase the force you receive. This power is multiplied over a larger area. So your lifting force will be much greater than the force exerted by a single rope.
The pulley is a great invention with many uses. For example, when lifting heavy objects, pulleys are a great way to get the job done, and it’s easier to do than one person. The pulley is fixed on a hinge and rotates on a shaft or shaft. Then pull the rope down to lift the object. A pulley assembly will make the task easier. In addition, it will also allow power to be transferred from one rotary shaft to another.

Types of pulleys

If you are an engineer, you must have come across different types of pulleys. Some pulleys come in multiple types, but a typical pulley has only one type. These types of pulleys are used in various industrial processes. Here are some common types of pulleys that engineers encounter on the job. In addition to the above, there are many more. If you haven’t seen them in practice, you can check out a list of the different types below.
Fixed pulleys: Fixed pulleys have a roller attached to a fixed point. The force required to pull the load through the fixed pulley is the same as the force required to lift the object. Movable pulleys allow you to change the direction of the force, for example, by moving it laterally. Likewise, movable pulleys can be used to move heavy objects up and down. Commonly used in multi-purpose elevators, cranes and weight lifters.
Composite pulleys combine fixed and movable pulleys. This combination adds to the mechanical advantage of both systems. It can also change the direction of the force, making it easier to handle large loads. This article discusses the different types of pulleys used for lifting and moving. Braided pulleys are an example of these pulleys. They combine the advantages of both types.
A simple pulley consists of one or more wheels, which allow it to reverse the direction of the force used to lift the load. On the other hand, dual-wheel pulleys can help lift twice the weight. By combining multiple materials into one pulley, a higher ME will be required. Regardless of the type of pulley, understanding the principles behind it is critical.
Pulleys are an important part of construction and mechanical engineering, and their use dates back to Archimedes. They are a common feature of oil derricks and escalators. The main use of pulleys is to move heavy objects such as boats. In addition to this, they are used in other applications such as extending ladders and lifting heavy objects. The pulley also controls the aircraft rudder, which is important in many different applications.

Commonly used

Common uses for pulleys are varied. Pulley systems are found throughout most areas of the house, from adjustable clotheslines to motor pulleys in different machines. Commercially, one of the most common uses is for cranes. Cranes are equipped with pulleys to lift heavy objects. It is also common to use pulley systems in tall buildings, which allow tall buildings to move with relative ease.
Pulleys are commonly used in interception and zipline systems, where a continuous rope around the pulley transmits force. Depending on the application, the rope is either light or strong. Pulleys are formed by wrapping a rope around a set of wheels. The rope pulls the object in the direction of the applied force. Some elevators use this system. Pull a cable on one end and attach a counterweight on the other end.
Another common use for pulleys is to move heavy objects. Pulleys mounted on walls, ceilings or other objects can lift heavy objects like heavy toolboxes or 2×4 planks. The device can also be used to transfer power from one rotating shaft to another. When used to lift heavy objects, pulleys can be used to help you achieve your goals of a good workout.
Pulley systems have a variety of uses, from the most basic to the most advanced. Its popularity is indisputable and it is used in different industries. A good example is timing belts. These pulleys transmit power to other components in the same direction. They can also be static or dynamic depending on the needs of the machine. In most cases, the pulley system is custom made for the job.
Pulley systems can be simple or complex, but all three systems transfer energy efficiently. In most cases, the mechanical advantage of a single pulley is 1 and the mechanical advantage of a single active pulley is 2. On the other hand, a single live pulley only doubles the force. This means you can trade effort for distance. Pulleys are the perfect solution for many common applications.

Safety Notice

If you use pulleys, you need to take some safety precautions. First, make sure you’re wearing the correct protective gear. A hard hat is a must to avoid being hit by falling objects. You may also want to wear gloves for added protection. You should also maintain a good distance from the pulley so that nearby people can walk around it safely.
Another important safety measure to take before using a chain hoist is to barricade the area to be lifted. Use marker lines to prevent the load from sliding when moving horizontally. Finally, use only the sprocket set for vertical lift. Always install shackle pins before lifting. You should also wear personal protective equipment such as earplugs and safety glasses when using the chain hoist.
In addition to these safety measures, you should also use cables made from aerospace-grade nylon. They will last many cycles and are made of high quality materials. Also, make sure the cables are lubricated. These measures reduce friction and corrosion. No matter what industry you are in, be sure to follow these precautions to ensure a long service life for your cables. Consult the cable manufacturer if you are unsure of the appropriate material. A company with 60 years of experience in the cable industry can recommend the right material for your system.

China Intelligent Trauma Negative Pressure Comprehensive Therapy Apparatus Using New Long-Life Vacuum Pump     pulley system	China Intelligent Trauma Negative Pressure Comprehensive Therapy Apparatus Using New Long-Life Vacuum Pump     pulley system
editor by czh 2022-11-29